Attention: There are many unknown companies quoting the same specs as Times Microwave and Andrew
/ Commscope Coaxial cable.

There are some issues with this:

1. Cheaper grades of cable may Start
   with the same loss but can quickly degrade over time with
   significant signal loss.
2. The Inner foil layer below the braided shield is bonded to the
   foam dielectric in a patented process that prevents signal leakage and
   moisture infiltration Only on US Made Times Microwave Coaxial Cable.
3. True Mil Spec testing criteria is not followed by many Chinese offshore
   producers and when retested by UL cable has repeatedly failed to pass
   muster.
4. When subjected to standardized quality testing – Jacket materials, Copper alloys, and Dielectric Foam
   have been found to be adulterated and containing contaminants.
5. While there are quality Coaxial Cable producers in China and other offshore locations
   they mainly produce cable for major brand name retailers who provide
   their own quality control, and do not sell off cable under “generic” or offbrand names.

Coax Cable Loss is Frequency Dependent – The Higher your Frequency the More
Important your Coax  Loss Is Measured in DB per 100 feet